VVIP Special🎁

Budget-Friendly, High-Spec Quality

⏰Final Days: Jul.25-Jul.31

Grab soon

Download Firmware for ARPHA Dash Cam

You can access official firmware files, system updates, and flashing instructions for ARPHA dash cams through the official download hubs and application channels below.

1. Official Firmware Download Directories

  • AZDOME VIP / ARPHA Firmware Hub:

    Visit the official ARPHA Firmware Download Portal to access official .bin firmware files categorized by model series (1-Channel, 2-Channel, 5K, and Mirror Dash Cams).

  • ARPHA Official Corporate Support:

    Access manual firmware downloads, system recovery packages, and software assistance directly via the ARPHA Global Support Hub.

  • Direct Support Email:

    If your specific camera model (e.g., A14, B25, D25, or E21) requires a dedicated recovery build, email ARPHA support with your camera's exact model number and Serial Number (SN).

2. OTA Firmware Updates via ARPHA Vision App

For Wi-Fi-enabled ARPHA models, updating Over-The-Air (OTA) via the official app is the safest and easiest method:

  1. Download and launch the ARPHA Vision app from the Google Play Store or Apple App Store.

  2. Connect your smartphone directly to your ARPHA dash cam’s Wi-Fi network.

  3. Open Device Settings $\rightarrow$ Firmware Version / Check for Updates.

  4. If a new firmware build is available, download the update package and tap Update Now. Keep the camera connected to 12V power until the system reboots automatically.

3. Manual MicroSD Card Flashing Instructions

 

1.Format the MicroSD Card:

Insert a Class 10/U3 MicroSD card into your ARPHA dash cam and perform a full format inside the camera settings menu.

2.Download the .bin File:

Download the exact .bin firmware file corresponding to your specific ARPHA model onto your computer. Do not rename or uncompress the file.

3.Transfer to Root Directory:

Connect the formatted MicroSD card to your computer and copy the .bin file directly onto the root directory (the main folder of the card, not inside any sub-folders).

4.Initiate the Flash Process:

Insert the card back into the powered-off dash cam and connect the camera to continuous 12V power. The indicator light will flash while the firmware installs. The device will automatically reboot upon completion.

5.Re-format Card Post-Update:

Once the dash cam turns back on, enter the settings menu and format the MicroSD card again to delete the update file, preventing continuous re-flashing cycles.

 

⚠️ Caution: Always keep your ARPHA dash cam continuously powered by a stable 12V supply during a firmware upgrade. Power interruption during a flash cycle can permanently brick the device's internal processor.

A12 Firmware D22 Firmware E21 Firmware
A14 Firmware D24 Firmware E22 Firmware
B25 Firmware D25 Firmware