
Download Firmware for AZDOME Dash Cam
You can download official firmware updates, Over-The-Air (OTA) builds, and flashing guides for AZDOME dash cams through the official download channels below.
1. Official Download & Support Portals
-
AZDOME VIP Official Firmware Hub:
Visit the AZDOME VIP Firmware Directory to locate direct
.binfirmware links for your specific model series:-
M-Series: M01, M01 Pro, M200, M300, M300S, M301, M330, M560, M580
-
GS-Series: GS63H, GS63H Pro, GS63 Pro
-
PG Mirror Series: PG02, PG02S (Europe), PG17 4K, PG17 Pro, PG17 Max, PG18S, PG19X, AR18
-
-
Official AZDOME Global Support Hub:
Access manual firmware downloads and technical forums via the AZDOME Official Download Portal.
-
Direct Email Technical Support:
If your model has hardware batch variations (e.g., M301, M550 Pro, or regional builds), match the exact build number by emailing support at
service@azdomevip.comorapp@szdome.comwith your current firmware version string.
2. OTA Firmware Updates via AZDOME App
For Wi-Fi-enabled models (such as the M300S, M580, GS63 Pro, PG17 4K, and M330), you can perform an Over-The-Air update using your smartphone:
-
Download and launch the AZDOME App from the Google Play Store or Apple App Store.
-
Connect your mobile device to the dash cam's Wi-Fi network.
-
Open Camera Settings $\rightarrow$ System Info / Firmware Version.
-
If an update is detected, tap Download & Upgrade. Ensure the camera remains plugged into continuous 12V power until the system reboots.
3. Manual MicroSD Card Flashing Instructions
⚠️ Critical Hardware Note: Installing firmware built for a different batch or model version (e.g., flashing M01 code onto an M01 Pro, or mixing PG02 and PG02S Europe builds) can cause screen striping or permanently brick the system processor. Always verify your current version string before manually flashing.

